Termékek a csomagolás (784)

Impulse sealers MG 820 series, with 820 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealers bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 820: bench sealing machine with manual closing of the bars MGMI 820: bench sealing machine with motorized bar closing and electric pedal Model:MG 820 Max. seal length:mm. 820 Seal width:mm. 5 Power:900W Dimensions:cm. 96x20x27 Weight:Kg. 26

TAPING MACHINE MOD. FP 9036 WITH MANUAL ADJUSTMENT AND 2 LATERAL DRIVE BELTS The taping machines series FP9036 and FP9037 are used in semiautomatic lines for the quick and safe closure of boxes using adhesive tape. The two taping heads simultaneously apply a strip of tape above and below the box. Depending on the size of the boxes (height and width), the operator must adjust the taping machine using handy handwheels. In the FP9036 model the structure of the machine body is in painted steel sheet and the cartons are dragged through 2 side drive belts. The machine is complete with 2 idle roller conveyors attached to the taping machine with length mm. 400 (for loading and unloading). It is equipped with wheels with brakes. Min. size (LxWxH):150 x 120 x 100 mm Max size (LxWxH):unlimited x 500 x 500 mm Tape width:50 mm Tape type:PPL-PVC Operation speed:20 m/min Belt drive :Left and right

Shoppers 100% biodegradabile e compostabile conforme alla norma uni en 13432 certificazione TUV Austria, certificato vincotte s556

Professional manual tackers Rocama 10/20 with body made of aluminum alloy. Loading dock below. Ideal for fixing labels on packaging and protective materials in wood, for assembly of frames and frames for decoration work, to set wallpaper, baseboards and wood profiles, for exhibitions stands, furniture stores, interiors of homes, caravans, campers and coatings of sofas and furniture. Equipped with power regulator. Available in two models: Rocama 10 for staples series AP with length of 5-8-10 mm, with total width 10 mm, section 0,45x0,90 mm. Rocama 20 for staples series AP with length of 10-12-14-16-20 mm, with total width 10 mm, section 0,45x0,90 mm, brads series FAST M of 20 mm and pin series FAST W of 20 mm, section 1,00x1,25. Example model:Rocama 20 Charger capacity:100 staples Staples lenght:from 10 to 20 mm Staples:AP 110-112-114-116-120 Pins:FAST M 20 with head – FAST W 20 without head

Particolarmente adatta ad essere utilizzata con cibi umidi e grassi perché possiede uno strato di politene interno che evita che la carta si macchi esternamente ed isola il prodotto mantenendone intatta la freschezza. Idoneità totale al contatto alimentare. MATERIALE:CARTA POLITENATA

Manual eyeleting machine suited to the insertion of the eyelets on boxes of pasta, biscuits and food in general. The eyelet is very used to attach the jumper on which are printed all product-related information. Usable eyelets:eyelets diameter mm. 7 and 9 Total Length:mm. 220

Pneumatic strapping tool with vibration welding (heating by friction) for straps in polypropylene PP and polyester PET width 13-16-19 mm and max. thickness mm. 1,27. Compact, handy, easy to use, is suitable for closing all kinds of flat packaging. Thanks to a very short base and the command of reverse rotation of the roller it may also strap round packing with a minimum diameter of mm. 700. The operator simply inserts the two overlapped strips into the strapping tool, press a button to make the tension, a second button to get the vibration welding, and at the end a third button to pull out the tensioning device effortlessly. Strap width:from 13.0 to 19.0 mm Strap thickness:0,60-1,27 mm Air pressure:6 bar Air consumpt:12 Lt. / sec Weight:5,2 Kg

L-SEALERS BSF SERIES The manuals bench L-sealers BSF series are very simple and practical. Allow to obtain the envelopes perfectly sealed, using standard fold film. They are suitable for use in laundries and textile sector in general and in the paper industry, but are also helpful in the food industry for the packaging of the bread. Sealing bar with manual operation. The choice of the machine must take into account that: the dimensions of the box (height + depth) must not exceed the maximum width of the reel mounted on the machine (depending on the model) also considering that there must always be at least 50 mm of waste. To confirm that the machine is suitable, we always advise you to contact us and report the measurements of the boxes to be packaged. Example model:BSF-501 Electrical supply (V-Hz):220-50 Power (Kw):1 Sealing area (L x W):500×350 mm Max. roll width:mm. 500 Sealing:wire seal (approx. 1 mm) Adjustable sealing time:0~2 sec Overall dimensions (L×W×H) (mm):950×550×370

Clipping machine FS CL 11-20 with ring closure for the assembly of wire mesh, springs for mattresses, fencing and packaging. Aluminium body, rubber grip, return of pneumatic gripper (without spring). Storage capacity:200 rings Working pressure:6 bar Width open loop (external):mm 19,3 Closing diameter:from 4,8 to 6,8 mm Type of ring used:FS 20 Z with wire diameter 1,50 mm

Grembiule monouso MATERIALE:PE

LEVER OPERATED YELETTING MACHINE, WITH SINGLE HEAD, automatic feeder, cast-iron frame, without stand. Suitable for smaller volume applications and where one eyelet are required. Ideal for automatic application of warranty seals in cardboard industry, bank office, post office and in many others field. It is especially used in food industry for to seal and at the same time for to apply a printed card on plastic bags. Structure :Cast-iron frame Painted steel base plate:mm. 310 x 240 Usable eyelets:type 7-9-050-051

CHAMBER VACUUM PACKAGING MACHINE DZ 410 T - VERTICAL Vacuum packaging machine for packaging in vertical envelopes containing coffee, rice, tea, powder products, fluid products, etc. The machine is built in stainless steel (AISI 304) and equipped with an electronic volumetric sensor with 3 programs digital panel. The compact size chamber and the vacuum pump with a capacity of 20 m3/h. ensure high productivity. Also available with filter for packing powdery products such as hazelnuts flour, milk powder and products with similar characteristics. The filter must be requested at time of order. The packaging machine is equipped with a painted wheeled support. Max thickness bag mm. 0.20 (0.8 total with bellows). By equipping the machine with jigs realized according to the specific dimensions of the product to be packaged, it is possible to obtain squared packs. The templates are not included with the machine. Sealing bar length:mm 400 Sealing width:mm 10 Chamber size:mm 400 x 85/180 x 350H Maximal product height:mm 300 Vacuum pump:20 m³/h Cycle Time:about 25 sec.

WHEELED VACUUM PACKAGING MACHINE DZ 400 2E WITH TWO SEALING BARS Wheeled vacuum packaging machine with two lateral sealing bars, made of stainless steel (AISI 304) and equipped with volumetric electronic sensor that enables the continuous vacuum control. Tank with with rounded lid for greater usable height in the central part. The compact size of the tank and the high power of the vacuum pump ensure high productivity. The adjustment of the welding time, vacuum and gas placing occur through practical potentiometers positioned frontally. VACUUM MACHINE WITH GAS INJECTION SYSTEM (MAP) Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Sealing bars length:mm 400 Chamber dimensions:mm 320x420 Chamber height (tank + cover):mm70/130 Vacuum pump:20 m3/h Work cycle:about 30 sec Sealing bars:2 lateral

Busta trasparente adatta a capi d’abbigliamento, realizzabile neutra o stampata, aperta su un lato.

Sturdy and professional roll holder suitable for the unwinding of heavy plastic reels film made of polyethylene. Load 100 Kg. Very robust reel holder, made of painted tubular steel and equipped with wheels with brake, it supports rolls with a weight of up to 100 kg and allows an operator to carry them out safely. The reel holders are made with the reel axis diameter 60 mm and length up to 2200 mm, very simple to rotate as it is mounted on ball bearings and equipped with cones for locking the reels. Depending on the presence or absence of the brake, the total width of the roll holder is approximately 200/300 mm wider than the useful width. The reel holder axis can be "idle" or "with brake". Reel holder axis:diameter 60 mm mounted on ball bearings Useful width:can be made to order from 1000 to 2200 mm Load:100 Kg Dimensions:depth 600 x height 800 mm

CF SERIES - CONSTANT TEMPERATURE HEAT SEALERS WITH PEDESTAL AND FOOT PEDAL ( for multi-layer bags) THE CF SERIES of constant heat sealers with pedestal and operated by foot pedal, are ideal for sealing bags made of compunds, multi-layer films, co-extruded films, OPP, heat-sealable cellophane. It is not suitable for polyethylene films. Being operated by foot pedal, the hands are free to feed the machine. The sealing jaws of the type "hot bar" are equipped with resistance and temperature controller for controlling the temperature from 30 ° C to 200 ° C. The temperature of the sealing jaws is adjustable according to the type and thickness of the material to be sealed, and is kept constant by a heat thermo-regulator. The maximum sealable thickness, that always varies according to the type of sealable material, is 0.25 mm. (50 mm. total). Also available in CFN version with timer and acoustic signal at the end of sealing. Example model:ME 300 CF seal length:mm. 300 Seal width :mm. 14 Height of sealing bars from the ground :mm. 800 Type of bars:Cross serrated Sealable material:PP-AL/PE Power supply:220Vv

Table top sealer with electric foot pedal and impulse seal suitable for the closures of envelopes in heat-sealable plastic material such as polyethylene, polypropylene, PVC, etc. The foot pedal with magnet hold downd closure, allows the operator to have both hands free. Simple to use and does not require preheating.

The ultrasonic sealers are ideal for sealing trays and plastic blister ( OPS, PSP, PVC, EPS) food grade or technical. This equipment is fast, secure, clean, simple and do not require preheating. This welding machine is widely used in the food industry and for technical welding trays and blisters in OPS, PSP, PVC, EPS, PET and replaces the dangerous staples The heat developed by the friction is transmitted to the two surfaces in plastic material and welds them instantly with a point and smudge resistant, the welding power is adjustable via potentiometer. Ceramic components with high precision is capable of producing an ultrasonic vibration of 55000/60000 cycles per second. Model:ME 405 US Sealing length:mm. 4 Sealing width:mm. 3 Power supply:220V Installed power:40W

FPX800 LEVER HAND DISPENSER - FOR GUMMED PAPER Manual dispenser suitable for measuring and cutting the gummed paper. Lever operation. Equipped with automatic cutting blade and water tank. The length of the paper strip is adjustable by lever with adjustable stroke. By simply pressing the lever, a strip of wet paper is obtained, ready to be applied to the box. The wetted paper ensures a much higher seal than the adhesive tape and provides a clear indication on the tampering of the box. Unlike the adhesive tape, to open the box it is necessary to break the paper and it is not possible to close it again. Usable roll dimensions :outside diameter max mm 200 width from mm 20 to mm 100 Cutting lenght:min mm 100 - max mm 1100 Gummed tape type:smooth/standard

Packaging machine with automatic cycle Skinpack, for wrapping objects of small, medium or large dimensions, between cardboard and transparent plastic film. The extreme usability and the use of unskilled workers encourage the use of this machine. The package Skinpack allows you to see the product immediately, it gives you the opportunity to advertise in color and include information on the carton, convenience of packaging that can be hung in the exhibitors. Given the high power of the machine is possible to use unperforated cartons. Example model:MASTER SKIN 5035 Working surface sizes :mm. 500 x 350 Max. package height:mm. 200 Max. film roll width :mm. 390 Usable film:PVC - SURLYN e PE Pneumatic supply:4-6 bar

Shoppers in carta kraft BIANCA o AVANA di pura cellulosa, fondo rinforzato, con soffietti laterali. Ideali per il take away e per le boutique.

Buste con stampa guanto MATERIALE:PE

HORIZONTAL DOUBLE CUTTERS BD 122 - BD 220 Universal cutters for cutting paper, corrugated cardboard, reinforced papers and polythene, polyethylene foil, polyethylene bubble, polyethylene foam. This series is very useful because you can use at the same time two different materials. The use of the cutter is extremely simple: it is necessary to carry the material to the desired length and manually operate the blade holding carriage, the cut is clean and precise in both directions. All the cutters are mounted on a frame complete with coil holder and rubber feet, on request may have the wheels with brake. For reasons of space the product is shipped disassembled. The cutter can be equipped with: RHOMBOIDAL BLADES: suitable for cutting plastic film, polyethylene foil, bubble wrap or foam. CIRCULAR BLADES: suitable for cutting paper, corrugated paper and reinforced. Example model:BD 122 Max. cutting width.:cm. 100 Type of blade:Rhomboidal (standard) for the cutting of plastic film Capacity:Kg 50 Max. reel diameter:cm. 100

BAG OPENER - BAGS OPENING DEVICE The Bag Opener is an opening device characterized by a regular and silent motorized fan and is designed to quickly pack and fill the bags. It consists of a stainless steel body suitable for contact with food and easy to clean. The bags with a hole for hooking are very easy to change and the constant air flow opens them easily one after the other. Fan with two-speed motor and on/off switch. Adjustable guides to facilitate filling. Attention: the collection of the bags takes place by tearing (naturally a small piece of bag will remain torn off). Airflow:550 l/min Power :50W Usable bag width :Max. 400 mm - Min. 160 mm Usable bag lenght :Max. 600 mm - Min. 200 mm Maximum recommended thickness :50 micron (0.05mm) Dimensions (mm) :400x675x150

CARTON SEALER MACHINE MOD. GEM 350 - GEM 360 - GEM 380 WITH ADJUSTABLE FORMAT AND WITH UPPER AND LOWER DRIVE BELTS. The two heads simultaneously apply a strip of tape taping above and below the box. Ideal for close boxes high and narrow. Structure of the machine body made of sheet steel bent, bolted and painted, the movement of the cartons is done by four drive belts flat, two lower and two upper, driven by a single motor, adjustments for the different formats are made through flywheels. The box has to get on the work surface with the top flaps closed. The machine is equipped with 4 wheels with brakes. Example model:GEM 350 minimum width:140-150 mm with head 50 / 180 mm with head 75 maximum width:520 mm minimum length:150 mm maximum length:unlimited minimum height:100 mm (55 in special version) maximum height:520 mm Max tape width:50 mm (75 optional)

BSL 5045 SEMIAUTOMATIC ANGULAR PACKAGING MACHINES Angular packaging machines with manual or automatic closing of the sealing bar and motorized product unloading belt. They can be combined with a retraction tunnel. FEATURES: - Sealing blade in NI-CR with non-stick coating - Control of the welding time to avoid overheating - Conveyor belt adjustable in height by handwheel - Double magnet for high closing force - Reel holder sliding on ball bearing guides, useful width mm. 550 - Return of the sealing bar controlled by a gas spring (for the 5045 L manual version) - Pneumatic device (compressed air) for closing and opening the sealing bar (for the BSL 5045 LA semi-automatic version) The BSL 5045 LA model is equipped with a maintained action dual control (the two buttons must be held down until the bars are completely closed). Example model:BSL 5045 LA Max. Sealing Size (L×H)(mm):500x450 Support plan size (L×W) (mm):450x400 H max. product (mm):250 Compressed air (bar):5-6 Maximal reel width (mm):550 Maximal hourly production (pz.):900

ME-FDE SEALERS WITH DOUBLE MOTORIZED PULSE SEALING BAR AND TEMPERATURE CONTROL The new bench sealers with double impulse sealing bar and temperature control, allow the optimal sealing of any type of envelopes and sealable bags. The high pressure exerted by the motorized descent of the bars (0.7 Kg./cm2) allows perfect sealing even on very thick materials. The double active motorized sealing bar (heats above and below) and the 5 mm sealing they allow the closure of envelopes with high thickness, laminated and envelopes with bellows. In addition to sealing polyethylene, polypropylene, coupled paper, aluminum, pvc and medical bags, it also allows the sealing of advertising banners. To seal the banners, we recommend sending samples, without obligation, to carry out the sealing tests. Maximum sealable thickness 0.20 mm (0.40 tot). Timers for regulating the sealing and cooling temperature ensure maximum reliability on all types of material. Sealing bars:mm. 450/mm. 600 Sealing width:mm. 5 Sealable materials:PE-PP-AL/PE

Impulse heat sealer for closing and coding plastic tubes of variable height, from 105 mm to 220 mm, with diameter up to 50 mm (60 mm with optional). Simple and compact with electromagnetic operation and innovative temperature control that constantly monitors, cycle after cycle, the real sealing temperature. CE certified. The TUBO3 heat sealer for tubes can seal tubes starting from 20 mm in diameter and 105 mm high. On request it is possible to make a special tube holder for tubes with a diameter of 20 mm and a height of 70 mm. However, it is not possible to seal tubes with a diameter of less than 20 mm and a height of less than 70 mm. Length of sealing bars:mm. 405 Sealing width:mm. 4 Sealable material:PE, PP, PVC Tubes diameter: 20,25,30,35,40,45,50 mm (only one type)

The proposed semi-automatic line includes a GEM 52 taping machine for boxes with side drive belts. Before the taping machine, a PACK POINT 08 box former was positioned, which makes it faster and easier to form and fill the boxes. Once the boxes have been filled, it is possible to advance them towards the taping line by pressing the appropriate button on the former. Dimensions min. (LxWxH):150 x 100 x 100 mm Dimensions max. (LxWxH):unlimited x 500 x 500 mm lenght:1080 mm (1880 with rollers) height:mm. 980 working height:650 mm Weight:125 kg Belt Drive:left and right

Semi-automatic line consisting of taping machine FP9036 with side straps (or FP9037 with straps above and below) for closing the upper and lower flap of the box and special plan for loading products. To facilitate the packaging operation of the products, an idle conveyor roller with boxes-stopper plan has been positioned before the taping machine. In this way it is possible to block and fill securely, quickly and easily the box not yet taped simply taking the products from a plan or from an adjacent container. Then, with a simple push, the operator will move the box in the taping machine. Dimensions min. (LxWxH):150 x 100 x 100 mm Dimensions max. (LxWxH):unlimited x 500 x 500 mm lenght:1080 mm (1880 with rollers) height:1470 mm (with taping head) working height:580-780 mm Weight:113 kg Belt Drive:left and right